D-Link 3324SRi Reference Manual - Page 131

xStack Gigabit Layer 3 Switch Command Line Interface Manual create vlan Restrictions header information is defined by the Reverse Address Resolution (RARP) Protocol. Each VLAN name can be up to 32 characters. If the VLAN is not given a tag, it will be a port-based VLAN. Only administrator-level users can issue this command. Example usage: NOTE: A specific protocol VLAN and a user defined protocol VLAN with the same encapsulation protocol cannot coexist and will result in a Fail! Message. (For example, if a user creates an Ethernet2 protocol VLAN, the user can not create a userDefined protocol VLAN with an Ethernet encapsulation) To create a protocol VLAN: DGS-3324SRi:4#create vlan v5 tag 2 protocol-ipxSnap Command: create vlan v5 tag 2 protocol-ipxSnap Success. Example usage: DGS-3324SRi:4# To create a VLAN v1, tag 2: DGS-3324SRi:4#create vlan v1 tag 2 Command: create vlan v1 tag 2 Success. DGS-3324SRi:4# delete vlan Purpose Syntax Description Parameters Restrictions Example usage: To remove the vlan "v1": Used to delete a previously configured VLAN on the Switch. delete vlan This command will delete a previously configured VLAN on the Switch. − The VLAN name of the VLAN you want to delete. Only administrator-level users can issue this command. 123