D-Link 3324SRi Reference Manual - Page 204

xStack Gigabit Layer 3 Switch Command Line Interface Manual To disable ciphersuite RSA_EXPORT_with_RC4_40_MD5 only: DGS-3324SRi:4#disable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5 Command: disable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5 Success. DGS-3324SRi:4# config ssl cachetimeout Purpose Syntax Description Parameters Restrictions Used to configure the SSL cache timeout. config ssl cachetimeout This command will set the time between a new key exchange between a client and a host using the SSL function. A new SSL session is established every time the client and host go through a key exchange. Specifying a longer timeout will allow the SSL session to reuse the master key on future connections with that particular host, therefore speeding up the negotiation process. timeout - Enter a timeout value between 60 and 86400 seconds to specify the total time an SSL key exchange ID stays valid before the SSL module will require a new, full SSL negotiation for connection. The default cache timeout is 600 seconds Only administrator-level users can issue this command. Example usage: To set the SSL cachetimeout for 7200 seconds: DGS-3324SRi:4#config ssl cachetimeout 7200 Command: config ssl cachetimeout 7200 Success. DGS-3324SRi:4# show ssl cachetimeout Purpose Syntax Description Parameters Restrictions Used to show the SSL cache timeout. show ssl cachetimeout Entering this command will allow the user to view the SSL cache timeout currently implemented on the Switch. None. None. 196