D-Link 3324SRi Reference Manual - Page 17

xStack Gigabit Layer 3 Switch Command Line Interface Manual 3 COMMAND SYNTAX The following symbols are used to describe how command entries are made and values and arguments are specified in this manual. The online help contained in the CLI and available through the console interface uses the same syntax. Note: All commands are case-sensitive. Be sure to disable Caps Lock or any other unwanted function that changes text case. Purpose Syntax Description Example Command Purpose Syntax Description Example Command Purpose Syntax Description Example Command Encloses a variable or value that must be specified. create ipif vlan ipaddress In the above syntax example, you must supply an IP interface name in the space, a VLAN name in the space, and the network address in the space. Do not type the angle brackets. create ipif Engineering vlan Design ipaddress 10.24.22.5/255.0.0.0 [square brackets] Encloses a required value or set of required arguments. One value or argument can be specified. create account [admin | user] In the above syntax example, you must specify either an admin or a user level account to be created. Do not type the square brackets. create account admin | vertical bar Separates two or more mutually exclusive items in a list, one of which must be entered. show snmp [community | detail] In the above syntax example, you must specify either community, or detail. Do not type the backslash. show snmp community 9