D-Link 3324SRi Reference Manual - Page 323
create ospf host_route, Stub Default Cost
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 323 highlights
Usage Example xStack Gigabit Layer 3 Switch Command Line Interface Manual To display an OSPF area's settings: DGS-3324SRi:4#show ospf area Command: show ospf area Area ID 0.0.0.0 10.48.74.122 Type Stub Import Summary LSA Normal None Stub Enabled Stub Default Cost None Enabled Total Entries: 2 DGS-3324SRi:4# create ospf host_route Purpose Syntax Description Parameters Restrictions Used to configure OSPF host route settings. create ospf host_route {area | metric } This command is used to configure the OSPF host route settings. − The host's IP address. − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. metric − A metric between 1 and 65535, which will be advertised. Only administrator-level users can issue this command. Usage Example To configure the OSPF host route settings: DGS-3324SRi:4#create ospf host_route 10.48.74.122 area 10.1.1.1 metric 2 Command: create ospf host_route 10.48.74.122 area 10.1.1.1 metric 2 Success. DGS-3324SRi:4# delete ospf host_route Purpose Syntax Description Used to delete an OSPF host route. delete ospf host_route This command is used to delete an OSPF host route. 315
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/323.png)