D-Link 3324SRi Reference Manual - Page 28

xStack Gigabit Layer 3 Switch Command Line Interface Manual config serial_port be open with no user input. • 2_minutes − The console will log out the current user if there is no user input for 2 minutes. • 5_minutes − The console will log out the current user if there is no user input for 5 minutes. • 10_minutes − The console will log out the current user if there is no user input for 10 minutes. • 15_minutes − The console will log out the current user if there is no user input for 15 minutes. Restrictions Only administrator-level users can issue this command. Example usage: To configure baud rate: DGS-3324SRi:4#config serial_port baud_rate 115200 Command: config serial_port baud_rate 115200 Success. DGS-3324SRi:4# enable clipaging Purpose Syntax Description Parameters Restrictions Used to pause the scrolling of the console screen when the show command displays more than one page. enable clipaging This command is used when issuing the show command which causes the console screen to rapidly scroll through several pages. This command will cause the console to pause at the end of each page. The default setting is enable. None. Only administrator-level users can issue this command. Example usage: To enable pausing of the screen display when the command output reaches the end of the page: DGS-3324SRi:4#enable clipaging Command: enable clipaging Success. DGS-3324SRi:4# 20