D-Link 3324SRi Reference Manual - Page 120

xStack Gigabit Layer 3 Switch Command Line Interface Manual DGS-3324SRi:4# show 802.1p default_priority Command: show 802.1p default_priority Port Priority ------- 1:1 1:2 1:3 1:4 1:5 1:6 1:7 1:8 1:9 1:10 1:11 1:12 1:13 1:14 1:15 1:16 1:17 1:18 1:19 1:20 1:21 1:22 1:23 1:24 ----------- 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 DGS-3324SRi:4# config scheduling_mechanism Purpose Syntax Description Used to configure the scheduling mechanism for the QoS function config scheduling mechanism [strict | weight_fair] The config scheduling_mechanism command allows the user to select between a Weight Fair (WRR) and a Strict mechanism for emptying the priority classes of service of the QoS function. The Switch contains seven hardware priority classes of service. Incoming packets must be mapped to one of these seven hardware priority classes of service. This command is used to specify the rotation by which these seven hardware priority classes of service are emptied. The Switch's default is to empty the seven priority classes of service in order − from the highest priority class of service (queue 6) to the lowest priority class of service (queue 0). Each queue will transmit all of the packets in its buffer before allowing the next lower priority class of service to transmit its packets. Lower classes of service will be pre-empted from emptying its queue if a packet is received on a higher class of service. The packet that was received on the higher class of service will transmit its packet 112