D-Link 3324SRi Reference Manual - Page 84
config system_severity, system_severity log
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual config system_severity Restrictions • critical - Entering this parameter along with the proper destination, stated above, will instruct the Switch to send only critical events to the Switch's log or SNMP agent. • warning - Entering this parameter along with the proper destination, stated above, will instruct the Switch to send critical and warning events to the Switch's log or SNMP agent. • information - Entering this parameter along with the proper destination, stated above, will instruct the switch to send informational, warning and critical events to the Switch's log or SNMP agent. Only administrator-level users can issue this command. Example usage: To configure the system severity: DGS-3324SRi:4#config system_severity trap critical Command: config system_severity trap critical Success. DGS-3324SRi:4# show system_severity Purpose Syntax Description Parameters Restrictions To display the current severity settings set on the Switch. show system_severity This command is used to view the severity settings that have been implemented on the Switch using the config system_severity command. None. None. Example usage: To view the system severity settings currently implemented on the Switch: DGS-3324SRi:4#show system_severity Command: show system_severity system_severity log : information system_severity trap : criticial DGS-3324SRi:4# 76
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/84.png)