D-Link 3324SRi Reference Manual - Page 327
config ospf aggregation, the OSPF Area.
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 327 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual config ospf aggregation Restrictions − The 32-bit number in the form of an IP address that uniquely identifies the network that corresponds to the OSPF Area. lsdb_type summary − Specifies the type of address aggregation. advertise [enable | disable] − Allows for the advertisement trigger to be enabled or disabled. Only administrator-level users can issue this command. Usage Example To configure the OSPF area aggregation settings: DGS-3324SRi:4#config ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enable Command: config ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enable Success. DGS-3324SRi:4# show ospf aggregation Purpose Syntax Description Parameters Restrictions Used to display the current OSPF area aggregation settings. show ospf aggregation {} This command will display the current OSPF area aggregation settings. − Enter this parameter if you wish to view this table by a specific OSPF area ID. None. Usage Example To display OSPF area aggregation settings: 319