D-Link 3324SRi Reference Manual - Page 283
delete iproute, delete iproute default, show iproute
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 283 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual delete iproute Restrictions Only administrator-level users can issue this command. Example Usage: To delete a backup static address 10.48.75.121, mask 255.0.0.0 and gateway (ipaddr) entry of 10.1.1.254 from the routing table: DGS-3324SRi:4#delete iproute 10.48.74.121/8 10.1.1.254 Command: delete iproute 10.48.74.121/8 10.1.1.254 Success. DGS-3324SRi:4# delete iproute default Purpose Syntax Description Parameters Restrictions Used to delete a default IP route entry from the Switch's IP routing table. delete iproute default This command will delete an existing default entry from the Switch's IP routing table. - The gateway IP address for the next hop router. Only administrator-level users can issue this command. Example usage: To delete the default IP route 10.53.13.254: DGS-3324SRi:4#delete iproute default 10.53.13.254 Command: delete iproute default 10.53.13.254 Success. DGS-3324SRi:4# show iproute Purpose Syntax Description Parameters Used to display the Switch's current IP routing table. show iproute {} {[static | rip | ospf]} This command will display the Switch's current IP routing table. − IP address and netmask of the IP interface that is the destination of the route. The address and mask information can be specified using the traditional format (for example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8). static - Use this parameter to display static iproute entries. 275
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/283.png)