D-Link 3324SRi Reference Manual - Page 30
disable telnet, enable web
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual disable telnet Purpose Syntax Description Parameters Restrictions Used to disable the Telnet protocol on the Switch. disable telnet This command is used to disable the Telnet protocol on the Switch. None. Only administrator-level users can issue this command. Example usage: To disable the Telnet protocol on the Switch: DGS-3324SRi:4#disable telnet Command: disable telnet Success. DGS-3324SRi:4# enable web Purpose Syntax Description Parameters Restrictions Used to enable the HTTP-based management software on the Switch. enable web This command is used to enable the Web-based management software on the Switch. The user can specify the TCP port number the Switch will use to listen for Telnet requests. − The TCP port number. TCP ports are numbered between 1 and 65535. The "well-known" port for the Web-based management software is 80. Only administrator-level users can issue this command. Example usage: To enable HTTP and configure port number: DGS-3324SRi:4#enable web 80 Command: enable web 80 Note: SSL will be disabled if web is enabled. Success. DGS-3324SRi:4# 22
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/30.png)