D-Link 3324SRi Reference Manual - Page 92

xStack Gigabit Layer 3 Switch Command Line Interface Manual delete stp instance_id Purpose Syntax Description Parameters Restrictions Used to delete a STP instance ID from the Switch. delete stp instance_id This command allows the user to delete a previously configured STP instance ID from the Switch. - Enter a value between 1 and 15 to identify the Spanning Tree instance on the Switch. Only administrator-level users can issue this command. Example usage: To delete stp instance id 2 from the Switch. DGS-3324SRi:4#delete stp instance_id 2 Command: delete stp instance_id 2 Success. DGS-3324SRi:4# config stp priority Purpose Syntax Description Parameters Restrictions Used to update the STP instance configuration. config stp priority instance_id This command is used to update the STP instance configuration settings on the Switch. The MSTP will utilize the priority in selecting the root bridge, root port and designated port. Assigning higher priorities to STP regions will instruct the Switch to give precedence to the selected instance_id for forwarding packets. The lower the priority value set, the higher the priority. priority - Select a value between 0 and 61440 to specify the priority for a specified instance id for forwarding packets. The lower the value, the higher the priority. This entry must be divisible by 4096. instance_id - Enter the value corresponding to the previously configured instance id of which the user wishes to set the priority value. An instance id of 0 denotes the default instance_id (CIST) internally set on the Switch. Only administrator-level users can issue this command. Example usage: To set the priority value for instance_id 2 as 4096: 84