D-Link 3324SRi Reference Manual - Page 234
TCP control flag synchronize, Specifies that the Switch will examine the Universal
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual config access_profile profile_id (IP) Control Message Protocol (ICMP) field within each packet. • type − Specifies that the access profile will apply to this ICMP type defined by a value between 0 and 255. • code − Specifies that the access profile will apply to this ICMP code defined by a value between 0 and 255. • igmp − Specifies that the Switch will examine the Internet Group Management Protocol (IGMP) field within each packet. • type − Specifies that the access profile will apply to packets that have this IGMP type defined by a value between 0 and 255.. • tcp − Specifies that the Switch will examine the Transmission Control Protocol (TCP) field within each packet. • src_port − Specifies that the access profile will apply only to packets that have this TCP source port in their TCP header. • dst_port − Specifies that the access profile will apply only to packets that have this TCP destination port in their TCP header. • flag_mask - Enter the type of TCP flag to be masked. The choices are: • urg: TCP control flag (urgent) • ack: TCP control flag (acknowledgement) • psh: TCP control flag (push) • rst: TCP control flag (reset) • syn: TCP control flag (synchronize) • fin: TCP control flag (finish) • udp − Specifies that the Switch will examine the Universal Datagram Protocol (UDP) field in each packet. • src_port − Specifies that the access profile will apply only to packets that have this UDP source port in their header. • dst_port − Specifies that the access profile will apply only to packets that have this UDP destination port in their header. • protocol_id − Specifies that the Switch will examine the Protocol field in each packet and if this field contains the value entered here, apply the appropriate rules. • user_define − Enter a hexidecimal value that will identify the protocol to be discovered in the packet header. port - The access profile for Ethernet may be defined for each port on the Switch. Up to 100 rules may be configured for each port. The port list is specified by listing the switch ID number and the port number on that switch, separated by a colon. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port 4. 226