D-Link 3324SRi Reference Manual - Page 41
Command, Parameters, create snmp user <SNMP_name 32> <groupname 32>
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual Command delete snmp group show snmp groups create snmp host delete snmp host show snmp host create trusted_host delete trusted_host show trusted_host enable snmp traps enable snmp authenticate_traps show snmp traps disable snmp traps disable snmp authenticate_traps config snmp system contact config snmp system location config snmp system name enable rmon disable rmon Parameters | notify_view } {v1 |v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]} Each command is listed, in detail, in the following sections. create snmp user Purpose Syntax Description Used to create a new SNMP user and adds the user to an SNMP group that is also created by this command. create snmp user {encrypted [by_password auth [md5 | sha ] priv [none | des ] | by_key auth [md5 | sha ] priv [none | des ]]} The create snmp user command creates a new SNMP user and adds the user to an SNMP group that is also created by this command. SNMP ensures: Message integrity − Ensures that packets have not been tampered with during transit. Authentication − Determines if an SNMP message is from a valid source. 33
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/41.png)