D-Link 3324SRi Reference Manual - Page 46
create snmp community, Vacm View Table Settings
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual DGS-3324SRi:4#show snmp view Command: show snmp view Vacm View Table Settings View Name ReadView WriteView NotifyView restricted restricted restricted restricted restricted CommunityView CommunityView CommunityView Subtree 1 1 1.3.6 1.3.6.1.2.1.1 1.3.6.1.2.1.11 1.3.6.1.6.3.10.2.1 1.3.6.1.6.3.11.2.1 1.3.6.1.6.3.15.1.1 1 1.3.6.1.6.3 1.3.6.1.6.3.1 View Type ---------Included Included Included Included Included Included Included Included Included Excluded Included Total Entries: 11 DGS-3324SRi:4# create snmp community Purpose Syntax Description Used to create an SNMP community string to define the relationship between the SNMP manager and an agent. The community string acts like a password to permit access to the agent on the Switch. One or more of the following characteristics can be associated with the community string: An Access List of IP addresses of SNMP managers that are permitted to use the community string to gain access to the Switch's SNMP agent. An MIB view that defines the subset of all MIB objects that will be accessible to the SNMP community. Read-write or read-only level permission for the MIB objects accessible to the SNMP community. create snmp community view [read_only | read_write] The create snmp community command is used to create an SNMP community string and to assign access-limiting characteristics to this community string. Parameters − An alphanumeric string of up to 32 characters that is used to identify members of an SNMP community. This string is used like a password to give remote SNMP managers access to MIB objects in the Switch's SNMP agent. view − An alphanumeric string of up to 32 characters that is used to identify the group of MIB objects that a remote SNMP manager is allowed to access on the Switch. read_only − Specifies that SNMP community members using the community string created with this command can only read the contents of the MIBs on the Switch. read_write − Specifies that SNMP community members using the community string created with this command can read from and 38
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/46.png)