D-Link 3324SRi Reference Manual - Page 247
Stacking Commands, config box_priority
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 247 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual 27 STACKING COMMANDS The stacking configuration commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Parameters config box_priority current_box_id priority config box_id current_box_id new_box_id [AUTO | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12] config box_type current_box_id type [DGS-3324SR | DXS-3350SR | DXS-3326GSR | BOX_NOTEXIST] config all_boxes_id [static_mode | auto_mode] show stack_information Each command is listed, in detail, in the following sections. config box_priority Purpose Used to configure box priority, which determines which box becomes master. Lower numbers have higher priority. Syntax config box_priority {current_box_id priority } Description This command configures box (switch) priority. Parameters current_box_id - Identifies the Switch being configured. Range is 1-12. priority - Assigns a priority value to the box, with lower numbers having higher priority. Range is 1-16. Restrictions Only administrator-level users can issue this command. Usage Example: To configure box priority: DGS-3324SRi:4#config box_priority current_box_id 1 priority 1 Command: config box_priority current_box_id 1 priority 1 Success. DGS-3324SRi:4# 239
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/247.png)