D-Link 3324SRi Reference Manual - Page 344
File System Commands, show storage_media_info
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 344 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual 44 FILE SYSTEM COMMANDS File System commands are used to configure files stored on a storage accessory located in the Switch, such as a CompactFlash card that can be used with the DGS-3324SRi only. These commands are based on DOS commands, cannot be used with the Switch's internal memory and are specific to the DGS-3324SRi member of the xStack family. The File System commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command show storage_media_info cd copy dir erase format md mkdir rd ren rename rmdir Parameters [] [] [FAT16] [fast | full | full_with_MBR] {} Each command is listed, in detail, in the following sections. show storage_media_info Purpose Syntax Description Parameters Restrictions Used to view media on the storage media accessory. show storage_media_info This command will display information stored on the storage media accessory. This command will display the following information: Drive: The name of the drive of the storage media accessory. Media_Type: Description of the type of storage media accessory currently in use. Size: Description of the size of memory space available on the storage media accessory. Label: Description assigned to this storage media accessory. FS_Type: Description of the type of format of this storage media accessory. None. None. 336
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/344.png)