D-Link 3324SRi Reference Manual - Page 318
config ospf router_id, enable ospf, config ospf router_id <ipaddr>
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 318 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual Command show ospf all create ospf virtual_link config ospf virtual_link delete ospf virtual_link show ospf virtual_link Parameters {hello_interval | dead_interval | authentication [none | simple | md5 ]} {hello_interval | dead_interval | authentication [none | simple | md5 ]} Each command is listed, in detail, in the following sections. config ospf router_id Purpose Syntax Description Parameters Restrictions Used to configure the OSPF router ID. config ospf router_id This command is used to configure the OSPF router ID. − The IP address of the OSPF router. Only administrator-level users can issue this command. Usage Example To configure the OSPF router ID: DGS-3324SRi:4#config ospf router_id 10.48.74.122 Command: config ospf router_id 10.48.74.122 Success. DGS-3324SRi:4# enable ospf Purpose Syntax Description Parameters Restrictions Usage Example To enable OSPF on the Switch: Used to enable OSPF on the Switch. enable ospf This command, in combination with the disable ospf command below, is used to enable and disable OSPF on the Switch. None. Only administrator-level users can issue this command. 310
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/318.png)