D-Link 3324SRi Reference Manual - Page 177
create authen_enable, config admin local_password
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual config authen_enable authenticated using the RADIUS protocol from a remote RADIUS server previously implemented on the Switch. server_group - Adding this parameter will require the user to be authenticated using a user-defined server group previously configured on the Switch. local_enable - Adding this parameter will require the user to be authenticated using the local user account database on the Switch. none - Adding this parameter will require no authentication to access the Switch. method_list_name - Enter a previously implemented method list name defined by the user (create authen_enable). The user may add one, or a combination of up to four (4) of the following authentication methods to this method list: tacacs - Adding this parameter will require the user to be authenticated using the TACACS protocol from a remote TACACS server. xtacacs - Adding this parameter will require the user to be authenticated using the XTACACS protocol from a remote XTACACS server. tacacs+ - Adding this parameter will require the user to be authenticated using the TACACS+ protocol from a remote TACACS+ server. radius - Adding this parameter will require the user to be authenticated using the RADIUS protocol from a remote RADIUS server previously implemented on the Switch. server_group - Adding this parameter will require the user to be authenticated using a user-defined server group previously configured on the Switch. local_enable - Adding this parameter will require the user to be authenticated using the local user account database on the Switch. The local enable password of the device can be configured using the "config admin local_password" command. none - Adding this parameter will require no authentication to access the administration level privileges on the Switch. Restrictions Only administrator-level users can issue this command. Example usage: To configure the user defined method list "Trinity" with authentication methods TACACS, XTACACS and local, in that order. 169
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/177.png)