D-Link 3324SRi Reference Manual - Page 216
config 802.1x auth_parameter, Command: config 802.1x auth_parameter ports 1:1 - 1:20 direction both
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual config 802.1x auth_parameter authentication attempt. tx_period - Configures the time to wait for a response from a supplicant (user) to send EAP Request/Identity packets. supp_timeout - Configures the time to wait for a response from a supplicant (user) for all EAP packets, except for the Request/Identity packets. server_timeout - Configure the length of time to wait for a response from a RADIUS server. max_req − Configures the number of times to retry sending packets to a supplicant (user). reauth_period − Configures the time interval between successive re-authentications. enable_reauth [enable | disable] − Determines whether or not the Switch will re-authenticate. Enabled causes re-authentication of users at the time interval specified in the Re-authentication Period field, above. Restrictions Only administrator-level users can issue this command. Example usage: To configure 802.1x authentication parameters for ports 1 - 20 of switch 1: DGS-3324SRi:4#config 802.1x auth_parameter ports 1:1 - 1:20 direction both Command: config 802.1x auth_parameter ports 1:1 - 1:20 direction both Success. DGS-3324SRi:4# config 802.1x auth_protocol Purpose Used to configure the 802.1x authentication protocol on the Switch. Syntax config 802.1x auth_protocol [local | radius_eap] Description The config 802.1x auth_protocol command enables you to configure the authentication protocol. Parameters [local | radius_eap] - Specify the type of authentication protocol desired. Restrictions Only administrator-level users can issue this command. Example usage: To configure the authentication protocol on the Switch: 208
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/216.png)