D-Link 3324SRi Reference Manual - Page 141

xStack Gigabit Layer 3 Switch Command Line Interface Manual config link_aggregation algorithm Restrictions mac_destination − Indicates that the Switch should examine the MAC destination address. mac_source_dest − Indicates that the Switch should examine the MAC source and destination addresses. ip_source − Indicates that the Switch should examine the IP source address. ip_destination − Indicates that the Switch should examine the IP destination address. ip_source_dest − Indicates that the Switch should examine the IP source address and the destination address. Only administrator-level users can issue this command. Example usage: To configure link aggregation algorithm for mac-source-dest: DGS-3324SRi:4#config link_aggregation algorithm mac_source_dest Command: config link_aggregation algorithm mac_source_dest Success. DGS-3324SRi:4# show link_aggregation Purpose Syntax Description Parameters Restrictions Used to display the current link aggregation configuration on the Switch. show link_aggregation {group_id | algorithm} This command will display the current link aggregation configuration of the Switch. − Specifies the group ID. The Switch allows up to 32 link aggregation groups to be configured. The group number identifies each of the groups. algorithm − Allows you to specify the display of link aggregation by the algorithm in use. None. Example usage: To display the current Link Aggregation configuration: 133