D-Link 3324SRi Reference Manual - Page 263
show sntp, enable sntp, SNTP Primary Server
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 263 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual To configure SNTP settings: DGS-3324SRi:4#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30 Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30 Success. DGS-3324SRi:4# show sntp Purpose Syntax Description Parameters Restrictions Used to display the SNTP information. show sntp This command will display SNTP settings information including the source IP address, time and poll interval. None. Only administrator-level users can issue this command. Example usage: To display SNTP configuration information: DGS-3324SRi:4#show sntp Command: show sntp Current Time Source : System Clock SNTP : Disabled SNTP Primary Server : 10.1.1.1 SNTP Secondary Server : 10.1.1.2 SNTP Poll Interval : 720 sec DGS-3324SRi:4# enable sntp Purpose Syntax Description Parameters Restrictions Enables SNTP server support. enable sntp This will enable SNTP support. SNTP service must be separately configured (see config sntp). Enabling and configuring SNTP support will override any manually configured system time settings. None. Only administrator-level users can issue this command. SNTP settings must be configured for SNTP to function (config sntp). Example usage: 255
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/263.png)