D-Link 3324SRi Reference Manual - Page 26

Example usage: xStack Gigabit Layer 3 Switch Command Line Interface Manual To show the current hardware status of the Switch: DGS-3324SRi:4#show device_status Command: show device_status ID Internal Power External power Side Fan Back Fan 2 Active Fail OK OK CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All show module_info Purpose Syntax Description Parameters Restrictions To show information concerning the added uplink module. show module_info This command is used to view information about the DEM-420X uplink module added to an xStack switch. Currently, only the DXS3326GSR and the DXS-3350SR members of the xStack family have the capability to add the optional DEM-420X module. Although the DGS-3324SR and the DGS-3324SRi do not support the optional module, information about the module can be viewed on these switches if they are stacked with one of the switches that support the optional module. The following explains what is presented in the window: Box ID - The ID of the switch in the switch stack. Module Name - The name of the optional module. Currently, switches in the xStack family only support the DEM-420X optional module. Rev. - The hardware revision of the optional module. Serial No. - The serial number associated with this particular optional module. Description - A brief description of the optional module including port count and module type. None. None. Example usage: To view information concerning the DEM-420X optional module added to an xStack switch. DXS-3326GSR:4#show module_info Command: show module_info Box ID -----1 2 Module Name Rev. DEM420X 2A1 - - Serial Description No. 123456789 2-Port 10GE XFP Uplink Module - - 18