D-Link 3324SRi Reference Manual - Page 187
config authen server_group, 1.1.121 protocol tacacs
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual config authen server_group utilizing the TACACS+ protocol may be added to this group. radius - Use this parameter to utilize the built-in RADIUS server protocol on the Switch. Only server hosts utilizing the RADIUS protocol may be added to this group. - Enter an alphanumeric string of up to 15 characters to define the previously created server group. This group may add any combination of server hosts to it, regardless of protocol. [add | delete] - Enter the correct parameter to add or delete a server host from a server group. server_host - Enter the IP address of the previously configured server host to add or delete. protocol - Enter the protocol utilized by the server host. There are four options: tacacs - Use this parameter to define the protocol if the server host is using the TACACS authentication protocol. xtacacs - Use this parameter to define the protocol if the server host is using the XTACACS authentication protocol. tacacs+ - Use this parameter to define the protocol if the server host is using the TACACS+ authentication protocol. radius - Use this parameter to define the protocol if the server host is using the RADIUS authentication protocol. Restrictions Only administrator-level users can issue this command. Example usage: To add an authentication host to server group "group_1": DGS-3324SRi:4#config authen server_group group_1 add server_host 10.1.1.121 protocol tacacs+ Command: config authen server_group group_1 add server_host 10.1.1.121 protocol tacacs+ Success. DGS-3324SRi:4# delete authen server_group Purpose Syntax Description Parameters Restrictions Used to delete a user-defined authentication server group. delete authen server_group This command will delete an authentication server group. - Enter an alphanumeric string of up to 15 characters to define the previously created server group to delete. Only administrator-level users can issue this command. 179
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/187.png)