D-Link 3324SRi Reference Manual - Page 217
config 802.1x init, DGS-3324SRi:4# config 802.1x auth_protocol local
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 217 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual DGS-3324SRi:4# config 802.1x auth_protocol local Command: config 802.1x auth_protocol local Success. DGS-3324SRi:4# config 802.1x init Purpose Syntax Description Parameters Restrictions Used to initialize the 802.1x function on a range of ports. config 802.1x init [port_based ports [| all] | mac_based [ports] [ | all] {mac_address ] The config 802.1x init command is used to immediately initialize the 802.1x functions on a specified range of ports or for specified MAC addresses operating from a specified range of ports. port_based - This instructs the Switch to initialize 802.1x functions based only on the port number. Ports approved for initialization can then be specified. ports − Specifies a range of ports. The port list is specified by listing the lowest switch number and the beginning port number on that switch, separated by a colon. Then the highest switch number, and the highest port number of the range (also separated by a colon) are specified. The beginning and end of the port list range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 − in numerical order. all − Specifies all of the ports on the Switch. mac_based - This instructs the Switch to initialize 802.1x functions based on the MAC address of a device on a specific port or range of ports. MAC address approved for initialization can then be specified. ports − Specifies a range of ports. The port list is specified by listing the lowest switch number and the beginning port number on that switch, separated by a colon. Then the highest switch number, and the highest port number of the range (also separated by a colon) are specified. The beginning and end of the port list range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 − in numerical order. all − Specifies all of the ports on the Switch. mac_address - Specifies the MAC address of the client to be added. Only administrator-level users can issue this command. Example usage: To initialize the authentication state machine of some or all: 209
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/217.png)