D-Link 3324SRi Reference Manual - Page 119
show 802.1 default_priority, Command: config 802.1p default_priority all 5
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Example usage: xStack Gigabit Layer 3 Switch Command Line Interface Manual To configure 802.1p default priority on the Switch: DGS-3324SRi:4#config 802.1p default_priority all 5 Command: config 802.1p default_priority all 5 Success. DGS-3324SRi:4# show 802.1 default_priority Purpose Used to display the currently configured 802.1p priority tags that will be assigned to incoming, untagged packets before being forwarded to its destination. Syntax show 802.1p default_priority {} Description The show 802.1p default_priority command displays the currently configured 802.1p priority tag that will be assigned to an incoming, untagged packet before being forwarded to its destination. Parameters − Specifies a port or range of ports to be viewed. The port list is specified by listing the lowest switch number and the beginning port number on that switch, separated by a colon. Then the highest switch number, and the highest port number of the range (also separated by a colon) are specified. The beginning and end of the port list range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 − in numerical order. Restrictions None. Example usage: To display the current 802.1p default priority configuration on the Switch: 111