D-Link 3324SRi Reference Manual - Page 54
delete snmp host, show snmp host
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual DGS-3324SRi:4#create snmp host 10.48.74.100 v3 auth_priv public Command: create snmp host 10.48.74.100 v3 auth_priv public Success. DGS-3324SRi:4# delete snmp host Purpose Syntax Description Parameters Restrictions Used to remove a recipient of SNMP traps generated by the Switch's SNMP agent. delete snmp host The delete snmp host command deletes a recipient of SNMP traps generated by the Switch's SNMP agent. − The IP address of a remote SNMP manager that will receive SNMP traps generated by the Switch's SNMP agent. Only administrator-level users can issue this command. Example usage: To delete an SNMP host entry: DGS-3324SRi:4#delete snmp host 10.48.74.100 Command: delete snmp host 10.48.74.100 Success. DGS-3324SRi:4# show snmp host Purpose Syntax Description Parameters Restrictions Used to display the recipient of SNMP traps generated by the Switch's SNMP agent. show snmp host {} The show snmp host command is used to display the IP addresses and configuration information of remote SNMP managers that are designated as recipients of SNMP traps that are generated by the Switch's SNMP agent. − The IP address of a remote SNMP manager that will receive SNMP traps generated by the Switch's SNMP agent. None. Example usage: To display the currently configured SNMP hosts on the Switch: 46
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/54.png)