D-Link 3324SRi Reference Manual - Page 207

xStack Gigabit Layer 3 Switch Command Line Interface Manual 24 802.1X COMMANDS The xStack family of switches implement the server-side of the IEEE 802.1x Port-based and MAC-based Network Access Control. This mechanism is intended to allow only authorized users, or other network devices, access to network resources by establishing criteria for each port on the Switch that a user or network device must meet before allowing that port to forward or receive frames. Command enable 802.1x disable 802.1x create 802.1x user show 802.1x user delete 802.1x user show 802.1x auth_state show 802.1x auth_configuration config 802.1x auth_mode config 802.1x capability config 802.1x auth_parameter ports config 802.1x auth_protocol config 802.1x init config 802.1x reauth config radius add config radius delete config radius show radius show acct_client show auth_client show auth_diagnostics show auth_session Parameters ports [ | all] ports [ | all] [port_based | mac_based] [ports | all] [authenticator | none] [ | all] [default | {direction [both | in] | port_control [force_unauth | auto | force_auth] | quiet_period | tx_period | supp_timeout | server_timeout | max_req | reauth_period | enable_reauth [enable | disable]}] [local | radius eap] {port_based ports [ | all]} | mac_based [ports] [ | all] {mac_address }] {port_based ports [ | all]} [ | all] {mac_address }] key [default {auth_port | acct_port }] {ipaddress | key [auth_port acct_port ]} {ports [ | all]} {ports [ | all]} 199