D-Link 3324SRi Reference Manual - Page 81
local use 4
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual config syslog host all Restrictions 15 clock daemon 16 local use 0 (local0) 17 local use 1 (local1) 18 local use 2 (local2) 19 local use 3 (local3) 20 local use 4 (local4) 21 local use 5 (local5) 22 local use 6 (local6) 23 local use 7 (local7) local0 − Specifies that local use 0 messages will be sent to the remote host. This corresponds to number 16 from the list above. local1 − Specifies that local use 1 messages will be sent to the remote host. This corresponds to number 17 from the list above. local2 − Specifies that local use 2 messages will be sent to the remote host. This corresponds to number 18 from the list above. local3 − Specifies that local use 3 messages will be sent to the remote host. This corresponds to number 19 from the list above. local4 − Specifies that local use 4 messages will be sent to the remote host. This corresponds to number 20 from the list above. local5 − Specifies that local use 5 messages will be sent to the remote host. This corresponds to number 21 from the list above. local6 − Specifies that local use 6 messages will be sent to the remote host. This corresponds to number 22 from the list above. local7 − Specifies that local use 7 messages will be sent to the remote host. This corresponds to number 23 from the list above. udp_port − Specifies the UDP port number that the syslog protocol will use to send messages to the remote host. state [enable | disable] − Allows the sending of syslog messages to the remote host, specified above, to be enabled and disabled. Only administrator-level users can issue this command. Example usage: To configure all syslog hosts: DGS-3324SRi:4#config syslog host all severity all Command: config syslog host all severity all Success. DGS-3324SRi:4##config syslog host all facility local0 Command: config syslog host all facility local0 Success DGS-3324SRi:4# config syslog host all udp_port 6000 Command: config syslog host all udp_port 6000 Success. 73
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/81.png)