D-Link 3324SRi Reference Manual - Page 110
show traffic control, Lookup Fail
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual DGS-3324SRi:4#config traffic control all broadcast enable Command: config traffic control all broadcast enable Success. DGS-3324SRi:4# show traffic control Purpose Syntax Description Parameters Restrictions Used to display current traffic control settings. show traffic control {group_list } This command displays the current storm traffic control configuration on the Switch. group_list − Used to specify a broadcast storm control group. This is specified by listing the lowest switch number and the beginning port number on that switch, separated by a colon. Then the highest switch number, and the highest port number of the range (also separated by a colon) are specified. The beginning and end of the port list range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 − in numerical order. None. Example usage: To display traffic control setting: DGS-3324SRi:4#show traffic control group_list 1:1-1:5 Command: show traffic control group_list 1:1-1:5 Traffic Control Module Group [ports] Threshold --------- 1 1 128 1 2 128 1 3 128 1 4 128 1 5 128 Broadcast Storm --------- Disabled Disabled Disabled Disabled Disabled Multicast Storm --------- Disabled Disabled Disabled Disabled Disabled Destination Lookup Fail -------- Disabled Disabled Disabled Disabled Disabled Total Entries: 5 DGS-3324SRi:4# 102