D-Link 3324SRi Reference Manual - Page 215
config 802.1x auth_parameter, config 802.1x auth_parameter ports [<portlist> | all]
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual DGS-3324SRi:4#config 802.1x capability ports 1:1 - 1:10 authenticator Command: config 802.1x capability ports 1:1 - 1:10 authenticator Success. DGS-3324SRi:4# config 802.1x auth_parameter Purpose Syntax Description Parameters Used to configure the 802.1x Authentication parameters on a range of ports. The default parameter will return all ports in the specified range to their default 802.1x settings. config 802.1x auth_parameter ports [ | all] [default | {direction [both | in] | port_control [force_unauth | auto | force_auth] | quiet_period | tx_period | supp_timeout | server_timeout | max_req | reauth_period | enable_reauth [enable | disable]}] The config 802.1x auth_parameter command is used to configure the 802.1x Authentication parameters on a range of ports. The default parameter will return all ports in the specified range to their default 802.1x settings. − Specifies a range of ports. The port list is specified by listing the lowest switch number and the beginning port number on that switch, separated by a colon. Then the highest switch number, and the highest port number of the range (also separated by a colon) are specified. The beginning and end of the port list range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 − in numerical order. all − Specifies all of the ports on the Switch. default − Returns all of the ports in the specified range to their 802.1x default settings. direction [both | in] − Determines whether a controlled port blocks communication in both the receiving and transmitting directions, or just the receiving direction. port_control − Configures the administrative control over the authentication process for the range of ports. The user has the following authentication options: • force_auth − Forces the Authenticator for the port to become authorized. Network access is allowed. • auto − Allows the port's status to reflect the outcome of the authentication process. • force_unauth − Forces the Authenticator for the port to become unauthorized. Network access will be blocked. quiet_period − Configures the time interval between authentication failure and the start of a new 207