D-Link 3324SRi Reference Manual - Page 139
delete link_aggregation group_id, config link_aggregation, Command: create link_aggregation group_id 1
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual DGS-3324SRi:4#create link_aggregation group_id 1 Command: create link_aggregation group_id 1 Success. DGS-3324SRi:4# delete link_aggregation group_id Purpose Syntax Description Parameters Restrictions Used to delete a previously configured link aggregation group. delete link_aggregation group_id This command is used to delete a previously configured link aggregation group. − Specifies the group ID. The Switch allows up to 32 link aggregation groups to be configured. The group number identifies each of the groups. Only administrator-level users can issue this command. Example usage: To delete link aggregation group: DGS-3324SRi:4#delete link_aggregation group_id 6 Command: delete link_aggregation group_id 6 Success. DGS-3324SRi:4# config link_aggregation Purpose Syntax Description Used to configure a previously created link aggregation group. config link_aggregation group_id {master_port | ports | state [enable | disable] This command allows you to configure a link aggregation group that was created with the create link_aggregation command above. The DGS-3324SRi supports link aggregation cross box which specifies that link aggregation groups may be spread over multiple switches in the Switching stack. 131
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/139.png)