D-Link 3324SRi Reference Manual - Page 55
create trusted_host, show trusted_host, Community Name/SNMPv3 User Name
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual DGS-3324SRi:4#show snmp host Command: show snmp host SNMP Host Table Host IP Address 10.48.76.23 10.48.74.100 SNMP Version Community Name/SNMPv3 User Name V2c private V3 authpriv public Total Entries: 2 DGS-3324SRi:4# create trusted_host Purpose Syntax Description Parameters Restrictions Used to create the trusted host. create trusted_host The create trusted_host command creates the trusted host. The Switch allows you to specify up to four IP addresses that are allowed to manage the Switch via in-band SNMP or TELNET based management software. These IP addresses must be members of the Management VLAN. If no IP addresses are specified, then there is nothing to prevent any IP address from accessing the Switch, provided the user knows the Username and Password. − The IP address of the trusted host. Only administrator-level users can issue this command. Example usage: To create the trusted host: DGS-3324SRi:4#create trusted_host 10.48.74.121 Command: create trusted_host 10.48.74.121 Success. DGS-3324SRi:4# show trusted_host Purpose Used to display a list of trusted hosts entered on the Switch using the create trusted_host command above. Syntax show trusted_host Description This command is used to display a list of trusted hosts entered on the Switch using the create trusted_host command above. 47