D-Link 3324SRi Reference Manual - Page 219
config radius add, Command: config 802.1x reauth port_based ports 1:1-1:18
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual To configure 802.1x reauthentication for ports 1-18 on switch 1: DGS-3324SRi:4#config 802.1x reauth port_based ports 1:1-1:18 Command: config 802.1x reauth port_based ports 1:1-1:18 Success. DGS-3324SRi:4# config radius add Purpose Syntax Description Parameters Restrictions Used to add a new RADIUS server. config radius add key [default | {auth_port | acct_port }] The config radius add command is used to add RADIUS servers to the Switch. − Assigns a number to the current set of RADIUS server settings. Up to 3 groups of RADIUS server settings can be entered on the Switch. The lowest index number will have a higher authenticative priority − The IP address of the RADIUS server. key − Specifies that a password and encryption key will be used between the Switch and the RADIUS server. − The shared-secret key used by the RADIUS server and the Switch. Up to 32 characters can be used. default − Uses the default UDP port number in both the "auth_port" and "acct_port" settings. auth_port − The UDP port number for authentication requests. The default is 1812. acct_port − The UDP port number for accounting requests. The default is 1813. Only administrator-level users can issue this command. Example usage: To configure the RADIUS server communication settings: DGS-3324SRi:4#config radius add 1 10.48.74.121 key dlink default Command: config radius add 1 10.48.74.121 key dlink default Success. DGS-3324SRi:4# 211
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/219.png)