D-Link 3324SRi Reference Manual - Page 57
enable snmp traps, enable snmp authenticate_traps, show snmp traps
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual enable snmp traps support on the Switch. Parameters None. Restrictions Only administrator-level users can issue this command. Example usage: To enable SNMP trap support on the Switch: DGS-3324SRi:4#enable snmp traps Command: enable snmp traps Success. DGS-3324SRi:4# enable snmp authenticate_traps Purpose Used to enable SNMP authentication trap support. Syntax enable snmp authenticate_traps Description This command is used to enable SNMP authentication trap support on the Switch. Parameters None. Restrictions Only administrator-level users can issue this command. Example Usage: To turn on SNMP authentication trap support: DGS-3324SRi:4#enable snmp authenticate_traps Command: enable snmp authenticate_traps Success. DGS-3324SRi:4# show snmp traps Purpose Used to show SNMP trap support on the Switch . Syntax show snmp traps Description This command is used to view the SNMP trap support status currently configured on the Switch. Parameters None. Restrictions Only administrator-level users can issue this command. Example usage: To view the current SNMP trap support: 49
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/57.png)