D-Link 3324SRi Reference Manual - Page 331
config ospf ipif, Designated Router DR. A number between 0 and 255.
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 331 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual config ospf ipif Restrictions metric − The interface metric (1 to 65535). Entering a 0 will allow automatic calculation of the metric. authentication - Enter the type of authentication preferred. The user may choose between: • none - Choosing this parameter will require no authentication. • simple − Choosing this parameter will set a simple authentication which includes a case-sensitive password of no more than 8 characters. • md5 − Choosing this parameter will set authentication based on md5 encryption. A previously configured MD5 key ID (1 to 255) is required. metric − This field allows the entry of a number between 1 and 65,535 that is representative of the OSPF cost of reaching the selected OSPF interface. The default metric is 1. state [enable | disable] - Used to enable or disable this function. Only administrator-level users can issue this command. Usage Example To configure OSPF interface settings: DGS-3324SRi:4#config ospf ipif System priority 2 hello_interval 15 metric 2 state enable Command: config ospf ipif System priority 2 hello_interval 15 metric 2 state enable Success. DGS-3324SRi:4# config ospf all Purpose Syntax Description Parameters Used to configure all of the OSPF interfaces on the Switch at one time. config ospf all {area | priority | hello_interval | dead_interval | authentication [none | simple | md5 ] | metric | state [enable | disable]} This command is used to configure all of the OSPF interfaces on the Switch, using a single group of parameters, at one time. area - A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. priority − The priority used in the election of the Designated Router (DR). A number between 0 and 255. hello_interval − Allows the specification of the 323
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/331.png)