D-Link 3324SRi Reference Manual - Page 342
Jumbo Frame Commands
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 342 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual 43 JUMBO FRAME COMMANDS Certain switches can support jumbo frames (frames larger than the standard Ethernet frame size of 1518 bytes). To transmit frames of up to 9K (and 9004 bytes tagged), the user can increase the maximum transmission unit (MTU) size from the default of 1536 by enabling the Jumbo Frame command. The jumbo frame commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command enable jumbo_frame disable jumbo_frame show jumbo_frame Parameters Each command is listed, in detail, in the following sections. enable jumbo_frame Purpose Syntax Description Parameters Restrictions Used to enable the jumbo frame function on the Switch. enable jumbo_frame This command will allow ethernet frames larger than 1536 bytes to be processed by the Switch. The maximum size of the jumbo frame may not exceed 9k. None. None. Example usage: To enable the jumbo frame function on the Switch: DGS-3324SRi:4#enable jumbo_frame Command: enable jumbo_frame Success. DGS-3324SRi:4# disable jumbo_frame Purpose Syntax Description Parameters Restrictions Used to disable the jumbo frame function on the Switch. disable jumbo_frame This command will disable the jumbo frame function on the Switch. None. None. 334
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/342.png)