D-Link 3324SRi Reference Manual - Page 113
config bandwidth_control, Command: config bandwidth_control 1:1-1:10 tx_rate 10
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual config bandwidth_control Restrictions − Specifies the packet limit, in Mbps, that the above ports will be allowed to receive. tx_rate − Specifies that one of the parameters below (no_limit or ) will be applied to the rate at which the above specified ports will be allowed to transmit packets. no_limit − Specifies that there will be no limit on the rate of packets transmitted by the above specified ports. − Specifies the packet limit, in Mbps, that the above ports will be allowed to transmit. Only administrator-level users can issue this command. Example usage: To configure bandwidth control: DGS-3324SRi:4#config bandwidth_control 1:1-1:10 tx_rate 10 Command: config bandwidth_control 1:1-1:10 tx_rate 10 Success. DGS-3324SRi:4# show bandwidth_control Purpose Syntax Description Parameters Restrictions Used to display the bandwidth control configuration on the Switch. show bandwidth_control {} The show bandwidth_control command displays the current bandwidth control configuration on the Switch, on a port-by-port basis. − Specifies a range of ports to be configured. The port list is specified by listing the lowest switch number and the beginning port number on that switch, separated by a colon. Then the highest switch number, and the highest port number of the range (also separated by a colon) are specified. The beginning and end of the port list range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 − in numerical order. Using this command without adding a portlist entry will show the bandwidth control for all ports in the Switch stack. None. Example usage: To display bandwidth control settings: 105
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/113.png)