D-Link 3324SRi Reference Manual - Page 37
Port Security Commands
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual 6 PORT SECURITY COMMANDS The port security commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Parameters config port_security ports [ | all ] {admin_state [enable | disable] | max_learning_addr | lock_address_mode [Permanent | DeleteOnTimeout | DeleteOnReset]} show port_security {ports } delete port mac_address port_security_entry_vlan_name Each command is listed, in detail, in the following sections. config port_security ports Purpose Syntax Description Parameters Used to configure port security settings. [ | all ] {admin_state [enable | disable] | max_learning_addr | lock_address_mode [Permanent | DeleteOnTimeout | DeleteOnReset]} This command allows for the configuration of the port security feature. Only the ports listed in the are effected. − Specifies a range of ports to be configured. The port list is specified by listing the lowest switch number and the beginning port number on that switch, separated by a colon. Then the highest switch number, and the highest port number of the range (also separated by a colon) are specified. The beginning and end of the port list range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 − in numerical order. all − Configure port security for all ports on the Switch. admin_state [enable | disable] - Enable or disable port security for the listed ports. max_learning_addr - Use this to limit the number of MAC addresses dynamically listed in the FDB for the ports. lock_address_mode [Permanent | DeleteOnTimeout | DeleteOnReset] - Indicates the method of locking addresses. The user has three choices: Permanent - The locked addresses will not age out after the aging timer expires. DeleteOnTimeout - The locked addresses will age out after the aging timer expires. DeleteOnReset - The locked addresses will not age out 29
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/37.png)