D-Link 3324SRi Reference Manual - Page 145
create ipif, config ipif, config ipif <ipif_name 12> [{ ipaddress <network_address>
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual create ipif Purpose Syntax Description Parameters Restrictions Used to create an IP interface on the Switch. create ipif {secondary | {state [enable | disable]} This command will create an IP interface. − The name for the IP interface to be created. The user may enter an alphanumeric string of up to 12 characters to define the IP interface. − IP address and netmask of the IP interface to be created. The address and mask information can be specified using the traditional format (for example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8). − The name of the VLAN that will be associated with the above IP interface. secondary - Enter this parameter if this configured IP interface is to be a secondary IP interface of the VLAN previously specified. secondary interfaces can only be configured if a primary interface is first configured. state [enable | disable] − Allows you to enable or disable the IP interface. Only administrator-level users can issue this command. Example usage: To create the primary IP interface, p1 on VLAN Trinity: DGS-3324SRi:4#create ipif p1 ipaddress 10.1.1.1 Trinity state enable Command: create ipif p1 ipaddress 10.1.1.1 Trinity state enable Success. DGS-3324SRi:4# To create the secondary IP interface, s1 on VLAN Trinity: DGS-3324SRi:4#create ipif p1 ipaddress 12.1.1.1 Trinity secondary state enable Command: create ipif p1 ipaddress 12.1.1.1 Trinity secondary state enable Success. DGS-3324SRi:4# config ipif Purpose Syntax Used to configure an IP interface set on the Switch. config ipif [{ ipaddress | vlan | state [enable | disable]} | bootp | dhcp] 137