D-Link 3324SRi Reference Manual - Page 326
delete ospf aggregation, delete ospf aggregation <area_id> <network_address>
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 326 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual DGS-3324SRi:4#create ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enable Command: create ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enable Success. DGS-3324SRi:4# delete ospf aggregation Purpose Syntax Description Parameters Restrictions Used to delete an OSPF area aggregation configuration. delete ospf aggregation lsdb_type summary This command is used to delete an OSPF area aggregation configuration. − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. − The 32-bit number in the form of an IP address that uniquely identifies the network that corresponds to the OSPF Area. lsdb_type summary − Specifies the type of address aggregation. Only administrator-level users can issue this command. Usage Example To configure the OSPF area aggregation settings: DGS-3324SRi:4#delete ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary Command: delete ospf aggregation 10.1.1.1 10.48.76..122/16 lsdb_type summary Success. DGS-3324SRi:4# config ospf aggregation Purpose Syntax Description Parameters Used to configure the OSPF area aggregation settings. config ospf aggregation lsdb_type summary {advertise [enable | disable]} This command is used to configure the OSPF area aggregation settings. − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. 318
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/326.png)