D-Link 3324SRi Reference Manual - Page 82
delete syslog host, show syslog host, Command: config syslog host all state enable
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual DGS-3324SRi:4# config syslog host all ipaddress 10.44.67.8 Command: config syslog host all ipaddress 10.44.67.8 Success. DGS-3324SRi:4# config syslog host all state enable Command: config syslog host all state enable Success. DGS-3324SRi:4# delete syslog host Purpose Syntax Description Parameters Restrictions Used to remove a syslog host, that has been previously configured, from the Switch. delete syslog host [ | all] The delete syslog host command is used to remove a syslog host that has been previously configured from the Switch. − Specifies that the command will be applied to an index of hosts. There are four available indexes, numbered 1 through 4. all − Specifies that all syslog hosts will be deleted. Only administrator-level users can issue this command. Example usage: To delete a previously configured syslog host: DGS-3324SRi:4#delete syslog host 4 Command: delete syslog host 4 Success. DGS-3324SRi:4# show syslog host Purpose Syntax Description Parameters Restrictions Used to display the syslog hosts currently configured on the Switch. show syslog host {} The show syslog host command is used to display the syslog hosts that are currently configured on the Switch. − Specifies that the command will be applied to an index of hosts. There are four available indexes, numbered 1 through 4. None. Example usage: 74
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/82.png)