D-Link 3324SRi Reference Manual - Page 352

xStack Gigabit Layer 3 Switch Command Line Interface Manual 45 COMMAND HISTORY LIST The command history list commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Parameters ? {} show command_history config command_history Each command is listed, in detail, in the following sections. ? Purpose Syntax Description Parameters Restrictions Used to display all commands in the Command Line Interface (CLI). ? {} This command will display all of the commands available through the Command Line Interface (CLI). {} - Entering the question mark with an appropriate command will list all the corresponding parameters for the specified command, along with a brief description of the commands function and similar commands having the same words in the command. None. Example usage To display all of the commands in the CLI: DGS-3324SRi:4#? .. ? clear clear arptable clear counters clear fdb clear log config 802.1p default_priority config 802.1p user_priority config 802.1x auth_mode config 802.1x auth_parameter ports config 802.1x auth_protocol config 802.1x capability ports config 802.1x init config 802.1x reauth config access profile profile_id config account config admin local_enable config all_boxes_id config arp_aging time 344