D-Link 3324SRi Reference Manual - Page 325
show ospf host_route, create ospf aggregation, Host Address
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 325 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual show ospf host_route Parameters Restrictions − The IP address of the host. None. Usage Example: To display the current OSPF host route table: DGS-3324SRi:4#show ospf host_route Command: show ospf host_route Host Address 10.48.73.21 10.48.74.122 Metric 2 1 Area_ID ----------10.1.1.1 10.1.1.1 Total Entries: 2 DGS-3324SRi:4# create ospf aggregation Purpose Syntax Description Parameters Restrictions Used to configure OSPF area aggregation settings. create ospf aggregation lsdb_type summary {advertise [enable | disable]} This command is used to create an OSPF area aggregation. − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. − The 32-bit number in the form of an IP address that uniquely identifies the network that corresponds to the OSPF Area. lsdb_type summary − The type of address aggregation. advertise [enable | disable] − Allows for the advertisement trigger to be enabled or disabled. Only administrator-level users can issue this command. Usage Example: To create an OSPF area aggregation: 317