D-Link 3324SRi Reference Manual - Page 42
create snmp user, Enter an alphanumeric sting
![]() |
UPC - 790069256042
View all D-Link 3324SRi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
xStack Gigabit Layer 3 Switch Command Line Interface Manual create snmp user Parameters Encryption − Scrambles the contents of messages to prevent it from being viewed by an unauthorized source. − An alphanumeric name of up to 32 characters that will identify the new SNMP user. − An alphanumeric name of up to 32 characters that will identify the SNMP group the new SNMP user will be associated with. encrypted - Allows the user to choose a type of authorization for authentication using SNMP. The user may choose: • by_password - Requires the SNMP user to enter a password for authentication and privacy. The password is defined by specifying the auth_password below. This method is recommended. • by_key - Requires the SNMP user to enter a encryption key for authentication and privacy. The key is defined by specifying the key in hex form below. This method is not recommended. auth - The user may also choose the type of authentication algorithms used to authenticate the snmp user. The choices are: • md5 − Specifies that the HMAC-MD5-96 authentication level will be used. md5 may be utilized by entering one of the following: - An alphanumeric sting of between 8 and 16 characters that will be used to authorize the agent to receive packets for the host. - Enter an alphanumeric sting of exactly 32 characters, in hex form, to define the key that will be used to authorize the agent to receive packets for the host. • sha − Specifies that the HMAC-SHA-96 authentication level will be used. - An alphanumeric sting of between 8 and 20 characters that will be used to authorize the agent to receive packets for the host. - Enter an alphanumeric sting of exactly 40 characters, in hex form, to define the key that will be used to authorize the agent to receive packets for the host. priv - Adding the priv (privacy) parameter will allow for encryption in addition to the authentication algorithm for higher security. The user may choose: • des - Adding this parameter will allow for a 56-bit encryption to be added using the DES-56 standard using: - An alphanumeric string of between 8 and 16 characters that will be used to encrypt the contents of messages the host sends to 34
![](/manual_guide/products/dlink-3324sri-reference-manual-364694b/42.png)