HP Deskjet 320 Solutions Guide - Page 52
Changing Default Graphics Density, Changing the DeskJet 320 and 340's Input Buffer Size, Localizing
View all HP Deskjet 320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Changing Default Graphics Density You can change default graphics resolution from the factory default of 300 dpi to 75, 100, or 150 dpi, and back to 300. You can set this new default Graphics Density from within the DJPMenu configuration utility. Changing the DeskJet 320 and 340's Input Buffer Size You can change the DeskJet 320 and 340's input buffer size from the default value of 16K to 48K. If you are using Windows, the default of 16K is recommended. If you are using a DOS application that prints mainly text, you may find that switching to 48K will shorten the time that your application is tied up printing to the DeskJet 340 and 320. Note You can clear changed extended settings by pressing the Online and Setup buttons while turning on the printer. This action restores all these settings: 300 dpi for default Graphics Density, 15 minutes for Power off time, 2 minutes for Sleep time and 16K for the DeskJet 340 and 320's Input Buffer Size. Localizing Factory Defaults You can also use the DJPMenu configuration utility to change the factory default settings1 to those appropriate to a particular country. Then when you reset the printer to the factory defaults, you will be setting them to the "country defaults" that you changed with the DJPMenu configuration utility. Changing a country default will cause the printer - after you have reset it - to use the default character set and media size setting appropriate for that country. See table 2-7. In order for the country default settings, that you have changed with DJPMenu, to actually take effect, you must reset the printer. First turn it off. Then, hold down the Online and Setup buttons and press the Power button to turn it on. . Caution Once you have localized the factory default settings, you cannot restore the printer to the original factory default settings by pressing the Online and Setup buttons while turning on the printer. If you wish to restore the original factory default settings, use DJPMenu to select "US" from the list of countries in the Country Default group box. Table 2-7. Country Defaults Available in DJPMenu1 Country Default Media Size Character Set US Letter PC-8 USA UK A4 UK Germany A4 Germany France A4 France Italy A4 Italy Norway A4 Norway 1 Sweden A4 Sweden Spain A4 Spain Portugal A4 Portugal 2-16 Installation and Configuration