Brother International PEDESIGN 8.0 Users Manual - English - Page 103

Arranging Embroidery Designs (Layout & Editing) ■ Region sewing attributes The available attributes differ depending on the selected sew type. Satin stitch Arranging Embroidery Designs (Layout & Editing) To specify underlay stitching, select the check box, and then specify settings for the following attributes. Use underlay stitching to prevent shrinking during stitching. Specify the type of underlay stitching to be sewn. • With text and manual punching patterns • With other patterns Edge only Single: Sews perpendicular to the specified sewing direction. Under sewing Region only (single layer of zigzag shaped stitches) Region only (single layer of piping stitches) Double: Sews at a 45° and -45° angle to the specified sewing direction. Edge and region (single layer of zigzag shaped stitches) Region only (double layer of zigzag shaped and piping stitches) Density Select Dense, Medium or Light as the density for the underlay stitching. Coarse Specify the stitch density as the number of threads per millimeter. Density Gradation To specify a gradation (shading) for the density, select the check box. Off This cannot be specified under the following conditions. • The sewing direction is set to Variable • Text and manual punching patterns Click Pattern to set the gradation pattern. c "Creating a gradation/blending" on page 115. Fine On 101