Brother International PEDESIGN 8.0 Users Manual - English - Page 197

Managing Embroidery Design Files (Design Database) Managing Embroidery Design Files (Design Database) b Memo: • To remove an embroidery design, select the design to be removed, and then click , or right-click the design, then click Remove from Writing List. • Patterns created on a custom-sized Design Page are written to cards split into their various hoop sections. c "Memo:" on page 139. 7. Continue until all embroidery designs that you want to write to an original card are selected. b Memo: • During this process, the card capacity indicator allows you to plan which designs you would like to save on an original card. The space used by designs in the writing list appears in blue. • To rewrite the embroidery files written on the original card, click to select those files, and move files to the writing list in the same manner. 8. After the embroidery designs to be written to the original card appear in the writing list, click to write the designs to the card. 9. Click OK. 10. To check the embroidery design file being written to the original card, click . → appears in the folder pane, and all embroidery designs written to the original card appear in the contents pane. b Memo: • Embroidery designs written to the original card appear as "Card Data" in the contents pane. • To display the contents of the folder in the contents pane, click . Switch the display by clicking and . → The embroidery design in the writing list are written to the original card. a Note: Do not remove the card or unplug the USB cable while patterns are being written to the card (while the LED indicator is flashing). 195