Brother International PEDESIGN 8.0 Users Manual - English - Page 144

Arranging Embroidery Designs (Layout & Editing) Print option Print image: Select this check box to print the image imported into the Design Page in addition to the embroidery pattern. However, any part of the image extending out of the print area for the embroidery will not be printed. Print sewing area box & center axes: Select this check box to print black lines to indicate the sewing area (refer to "Specifying the sewing area" on page 140) and the center axes for the data. (This setting is only available when Actual Size is selected.) Print template grid: Select this check box to print green lines to represent the grid printed on the embroidery sheet included with the hoop. Print hoop section boundaries onto the first page: Select this check box to print the design sections of a design for which the Design Page has been set to a custom size or to a multi-position hoop. The pattern sections are printed in red. Divide embroidery image into 2 pages: Select this check box to print in actual size and on A4- or Letter-size paper design that is larger than the paper size by dividing them in two and printing each half on different pages. (This setting is only available when Actual size is selected in the Print Setup dialog box and when the Design Page is set to the larger hoop sizes [300 × 200 mm (11 3/4" × 7 3/4"), 200 × 300 mm (7 3/4" × 11 3/4"), 180 × 300 mm (7" × 11 3/4") when set to Hoop Size, and 170 × 290 mm (180 × 300 mm) 6.69" × 11.41" (7" × 11 3/4") or 290 × 190 mm (300 × 200 mm) 11.41" × 7.48" (11 3/4" × 7 3/4") when set to Custom Size].) With this split printing feature, / or / is printed in the lowerright corner of the paper to indicate which half is printed. Stitch image Normal: Select this option to print the design as lines and dots. Realistic: Select this option to print a realistic image of the design. To change the settings of the realistic image, click Attributes. c "Memo" on page 65. a Note: If the Divide embroidery image into 2 pages check box is cleared and you print on a larger paper size, the design does not print in two halves. Likewise, if you print on a smaller paper size, the design might be cut off. 142 4. When printing an imported image onto iron-on paper or printable fabric, or when printing the sheet for positioning the embroidery in the printed image, select the Image print mode check box, and then select an option under Material. Material Print the image on printable fablic or an iron-on transfer sheet: Select this option to print the background image on iron-on material or fabric that can be printed on. Only the image is printed. Print a flipped image: Select this option to print the image flipped on a vertical axis. When printing on iron-on paper, the image is normally printed flipped (mirror image). (For details, refer to the instructions for the iron-on paper that you are using.) Select this option if your printer does not have a function for printing a flipped (mirror) image. (For details, refer to the instructions for your printer.) Print a sheet of paper for aligning the printed image and the embroidery: Select this option to print a sheet for aligning the positions of the image and embroidery. Positioning marks and guidelines indicating the embroidering area are printed on the image. Change Position: The position where the image is printed on the paper can be changed. (Any part of the image extending out of the print area of the paper is not printed.) Click Change Position to display the Image Print Position Setting dialog box, and then drag the image to the desired printing position in the paper. 5. Click OK. c "Displaying a preview of the embroidery" on page 65.