Brother International PEDESIGN 8.0 Users Manual - English - Page 182
Embroidering, Step 7
View all Brother International PEDESIGN 8.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Tutorial (Advanced) 2 Keeping the reference lines on the embroidery sheet aligned with the reference lines for the first pattern section, place the fabric and inner ring of the embroidery hoop into the outer ring of the hoop, and then pull the fabric so that it is tight. Step 7 Embroidering Now, we are ready to embroider the design. 1 When large-size embroidery design are transferred to the embroidery machine, the patterns appear on the embroidery machine display as shown below. For this example, select the first embroidery pattern section (Aa). 3 Finish hooping the fabric, and then remove the embroidery sheet. a Note: • Place the fabric and hoop on a level surface, and then make sure that the inner ring is pressed in well enough that the top edge of the inner ring aligns with the top edge of the outer ring. • If the embroidery sheet is not used, the marks on the embroidery hoop can be used to hoop the fabric vertically and horizontally. However, since the center point on some embroidery machines is off center, the embroidery sheet should be used for best results. • Another way to hoop the fabric is to use sticky stabilizer that can be hooped separately, tear away the protective paper, then carefully align the fabric onto the sticky surface using the embroidery sheet as a guide. • Tip: The fabric can be hooped more easily if double-sided tape is affixed to the back of the inner ring, which is placed on top of the fabric, and then the fabric is clamped between the inner ring and the outer ring. b Memo: If there is no stitching in section Aa, select the first section that contains stitching. Select the menu command Option - Design Property to check the embroidering order. 2 Attach the embroidery hoop to the embroidery machine, and then using the machine's layout adjusting functions, align the needle position with the intersection of the lines drawn on the fabric. 3 Embroider the selected pattern. 4 Remove the embroidery hoop from the embroidery machine, and then remove the fabric from the hoop. 5 Hoop the fabric for the next design section. c "Hooping the fabric" on page 179. 180