Sony DCR TRV33E Operating Instructions - Page 216
Windows XP, Windows 2000, Other OS, Autres systèmes d'exploitation, Memory Stick DCR-TRV22E
UPC - 072874309039
View all Sony DCR TRV33E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
Connecting your camcorder to a Raccordement de votre caméscope à computer using the USB cable votre ordinateur à l'aide du câble USB (For Windows users) (pour les utilisateurs de Windows) Viewing images recorded on the "Memory Stick" (DCR-TRV22E/ TRV33E only) Step1: Uninstall the incorrect USB driver 1 Turn on the computer and allow Windows to load. 2 Insert the "Memory Stick" into your camcorder. 3 Connect the AC Adaptor and set the POWER switch to . 4 Connect the USB port on the computer to the (USB) jack on your camcorder using the USB cable supplied. 5 Open the computer's "Device Manager." Windows XP: Select "Start" t "Control Panel" t "System" t "Hardware" tab and click the "Device Manager" button. If there is no "System" inside "Pick a category" after clicking "Control Panel," click "Switch to classic view" instead. Windows 2000: Select "My Computer" t "Control Panel" t "System" t "Hardware," and click the "Device Manager" button. Other OS: Select "My Computer" t "Control Panel" t "System," and click "Device Manager." 6 Select "Other devices." Select the device prefixed with the "?" mark and delete. Ex: (?)Sony Handycam 7 Set the POWER switch to OFF (CHG) on your camcorder, then disconnect the USB cable. 8 Restart the computer. Step2: Install the USB driver on the supplied CD-ROM Follow the entire procedure in "Installing the USB driver" on page 206. 216 Visionnage d'images enregistrées sur un « Memory Stick » (DCR- TRV22E/TRV33E uniquement) Etape1 : Désinstallez le pilote USB mal installé 1 Mettez l'ordinateur sous tension et laissez Windows démarrer. 2 Insérez un « Memory Stick » dans votre caméscope. 3 Branchez l'adaptateur secteur, puis réglez le commutateur POWER sur . 4 Raccordez la prise (USB) de votre caméscope au port USB de votre ordinateur à l'aide du câble USB fourni. 5 Ouvrez le « Gestionnaire de périphériques » de votre ordinateur. Windows XP : Sélectionnez « Démarrer » t « Panneau de commande » t « Système » et l'onglet « Matériel », puis cliquez sur le bouton « Gestionnaire de périphériques ». Si vous ne trouvez pas « Système » dans « Choisissez une catégorie » après avoir cliqué sur « Panneau de commande », cliquez sur « basculer vers l'affichage classique » à la place. Windows 2000 : Sélectionnez « Poste de travail » t « Panneau de commande » t « Système » et l'onglet « Matériel », puis cliquez sur le bouton « Gestionnaire de périphériques ». Autres systèmes d'exploitation : Sélectionnez « Poste de travail » t « Panneau de commande » t « Système » puis cliquez sur « Gestionnaire de périphériques ». 6 Sélectionnez « Autres périphériques ». Sélectionnez le périphérique portant le préfixe « ? » et supprimez-le. Ex : (?)Sony Handycam 7 Réglez le commutateur POWER sur OFF (CHG) sur votre caméscope, puis débranchez le câble USB. 8 Redémarrez l'ordinateur. Etape 2 : Installez le pilote USB à partir du CD-ROM fourni Effectuez toute la procédure décrite dans la section « Installation du pilote USB » à la page 206.